5.0 mm Pilot Drill Lower Part and Purpose: Bending Tool Protocol

and Purpose: Bending Tool Protocol

Instructions for use:

0 mm Punch Drill with 2 open sides for tissue removal is for optional use (with rotation of 600-800 RPM) prior to Flattening Drill

4 mm Flattening Drill is designed to remove soft tissue and to flatten the alveolar ridge when a pointed alveolar crest would deflect the initial drill off to one side or the other

Must be used with: Angle-Cut Guide Sleeve - With Cleat - 3

5.0 mm Pilot Drill Lower Part and Purpose: Bending Tool ProtocolAdvantages, Protocol, and Maintenance: 5. 0 mm Depth Stop Drill Manual The stainless steel 5. 0 mm Pilot Drill with tri spade pointed tip is designed to initiate the osteotomy through the dense cortical bone. It is recommended (not always necessary) to use the Flattening Drill prior to the Pilot Drill and start the dental implant osteotomy site preparation with the Pilot Drill. Caution: When the Pilot Drill becomes dull it should be replaced to