Friction Floor Lacquer (Formerly HP Friction+) Type_Thinners Product advantages: Ready for full

Product advantages: Ready for full use after 24 hours

Sheet cover

Compared to regular 1C oils the 2C technology achieves a quicker curing

efficiency and longer life than other Al/Ox and zirconia competitors

1L will cover approximately 3 doors in two coats depending on the timber and method of application

Friction Floor Lacquer (Formerly HP Friction+) Type_Thinners Product advantages: Ready for fullA slip resistant two component non yellowing water based 100% polyurethane lacquer, based upon our HP Commercial lacquer. It is fast curing and ideal for use in high traffic areas where slip resistance is important, eg. restaurants and bars. HP Friction+ lacquer must be used as the final coat only. HP Friction+ lacquer must be mixed with Junckers HP Friction+ Hardener before use. Coverage Approx. 10 12 m per litre