Airgas Two Stage Brass 0-100 psi Analytical Cylinder Regulator CGA-580 With Needle Valve Single Stage The raw material is blended

The raw material is blended to enhance strength and stiffness

non-lubricated check valve incorporated into nose and prevents air and contaminants from entering the gas stream during cylinder change out

a CGA-510 connection must be used

Regulators are adjusted easily by removing the knurled nut and turning the screw to alter the tension on the diaphragm

This series of 316 stainless steel high-purity

Airgas Two Stage Brass 0-100 psi Analytical Cylinder Regulator CGA-580 With Needle Valve Single Stage The raw material is blendedThis analytical series of high purity brass, two stage regulators is recommended for non corrosive analytical and process applications where precise pressure control is required. This series is ideally suited for chromatographic carrier gas applications including FID, TCD, ECD, HID, and non corrosive gas mixtures for analytical instrumentation. These units feature stainless steel diaphragms and bar stock bodies with low internal volume and minimal