Amplified GPS Antenna Splitter | 2 Outputs, 1 Input, BNC Connectors 53050(12V) The 1740 Long Protector case

The 1740 Long Protector case is designed with rugged construction and built to protect even the most sensitive equipment while traveling to the harshest environments

a control signal is sent from the audio panel to the AV-590 to switch the AV-590 to the selected radio therefore isolating the remaining radio from the AV-590 electric switch

This TA202 (EDMO# 6430202-9) has a USB-A connector in the front

This tape is impregnated with a specially formulated synthetic elastomer finish to improve knot holding and tying characteristics

Model 236MTBYPX-4

Amplified GPS Antenna Splitter | 2 Outputs, 1 Input, BNC Connectors 53050(12V) The 1740 Long Protector caseThe ALDCBS1X2 GPS amplified splitter has one input and two outputs and is based on the Wilkinson splitter design. The frequency response covers the entire L band (GNSS) frequencies with excellent gain flatness. In normal configuration, the RF output (J1) passes DC from a connected GPS receiver through the splitter and onto the antenna allowing the GPS receiver to power both the antenna and the splitters internal amplifier. The other RF output (J2) is