GM 6640 Strut Rod Nut Socket 18mm Shop by Category > Fuel System & Ignition>Disconnect Tools KD Gearwrench Tools 2955N 1/4"

KD Gearwrench Tools 2955N 1/4" Drive Beam Torque Wrench 0-80 in/lbs

Drill America DWTSR1-3856 3/8"-56 X 1" OD HSS Round Adjustable Die

the configuration for the IPR changed in 2005 and a second tool was developed for the change

Drill America DWTSH2-3/8-16 2-3/8"-16 Carbon Steel Hex Die

This tool is officially called out in TSB 06‑4‑9

GM 6640 Strut Rod Nut Socket 18mm Shop by Category > Fuel System & Ignition>Disconnect Tools KD Gearwrench Tools 2955N 1/4"GM 6640 Strut Rod Nut Socket 18mm Kent Moore Tool Number: CH 50732 A GM Number: 50732 A For use on shock absorbers that have the electrical terminals coming through the center of the tenion and the mounting nut deep into the top mount. A typical socket cannot be used in this application. The tenion must be held with a 9mm open end wrench. This design will make the repair easier. This tool will also work with Passive Absorbers. Hex Size: 18 mm. 1 2"